Without stain (natural)
While these are truly “drop in stocks” we cannot guarantee proper installation as it is beyond our control. Minor variations occur in Springfields and some minor fitting could be required.
7 Reviews
-
Cracked after 10 rounds
This stock cracked within 10 shots. The metal sleeve was added and recoil bolts were installed. There was a knot immediately behind the receiver that cracked. Also this stock took hours of dremeling and drilling to make work. The buttplate screw is a honorable mention as to being a pain in the ass to drill. The recoil bolt holes are not drilled deep enough to contact threads, the barrel band retaining clip hole is not drilled. The end band is not drilled and not even close to a contour that will accept the bayonet lug. POS. Go with USGI
-
SPRINGFIELD C STOCK
THE INLETTING IN THE ONE I GOT IS TOO DEEP FOR THE ACTION , WHEN TIGHTENED DOWN CORRECTLY THE HANDGAURD RING IS PULLED INTO THE STOCK SO DEEP THE HANDGAURD WONT FIT .TO CORRECT THE PROBLEM THE STOCK WILL HAVE TO BE GLASSBEDDED .
-
Springfield 1903 C stock unfinished
Excellent 5 Stars. After looking for a reasonably priced unstained 1903 stock for a while, I decided to try this one. Nice military grade straight grain. Took about two hours to finish inletting. Easy to adjust forend tip pressure to about 8 pounds. Fits great and required no epoxy or fillers. If you know what you are doing when fitting a 1903 stock, this is an excellent choice. My customer will be very pleased.
-
1903a3 stock
Beautiful stock had to remove some wood for the trigger guard to fit properly and also with the butt plate to sit flush also had to drill holes for the butt plate and barrel band doesn’t come with stock reinforcement bolts
-
Springfield c stock
Beautiful! Only downside is I had to do a lot of hand fitting.
-
Springfield C Stock Walnut Wood New
Beautiful stock, my example has a couple of dark nots in the wood grain. It does require some inletting and is a bit fat. I’m only giving it 4 stars because the stock is not inleted enough for the rear tang of the trigger guard. However, it only took me about an hour to get the action and all the metal fitted. Will require some final shaping and finish sanding. Overall a very nice looking C stock. Can’t beat the price.
-
Very poor inletting
The action does not feet Properly
The trigger guard did not feet wood had to be removed, front end of stock not in level with the action end removed a lot of wood the max i cud do ,the barrel still tite on the stock not free floating
