This sleeve allows you to use a standard 1911 extractor in Para Ordnance slides that were originally equipped with the PXT extractor. Installation should be performed by a qualified gunsmith. Unload firearm before any work begins. Remove and disassemble slide. Fully clean sleeve and extractor hole in slide. Failure to remove all grease and oil will prevent Loctite from securing the sleeve. Trial fit sleeve in slide with extractor to make sure sleeve does not protrude past the breech face. You may need to trim to fit your slide correctly. It is OK if it is slightly below the surface. Sleeve is designed to work with series 70 type slides and will need to be modified to work with series 80 slides. After you are satisfied with the fit, install sleeve into slide with red Loctite. You may now use any standard type 1911 extractor in your slide.
3 Reviews
-
Works as advertised
Works as advertised. Adapter got a Para up and running again.
-
PXT extractor sleeve
If you need to use std 1911 extractors on a Para pistol with the older drilled through extractor slides, you will need this sleeve.
-
Para Ordnance PXT Extractor Sleeve PARA308
Excellent product! Allows a slide that is drilled for a PXT extractor mechanism to use standard 1911 extractors. Have installed several and they work great.
